Enlarge

DESCRIPTION

ACL-SV-SSO series solenoid valves are certified safety shutdown valves typically used in fuel gas valve trains. Available in a wide range of operating voltages with extremely low power consumption, they are suitable for use at remote locations where an adequate power supply may be a concern. ACL solenoid valves do not require air to operate/assist.

Specifications

Power supply	12 or 24 VDC, 120 VAC 50/60Hz
Wattage	1.8 watts
Operating temp range	-40°C to +65°C
Proof pressure	120 psi
Explosion proof	(Class 1, Div 1)
Service	Natural gas, NGL
Valve Size (NPT)	1"
Cv Coefficient	12.87

Features

• Low wattage
• 12 or 24 VDC and 120 VAC
• Explosion proof (Class 1, Div 1)
• Low temp operation (-40°C to +65°C)
• Stainless steel body and internals

Recommendations for Installation

• Piping should be flushed clean of dirt, burrs, and welding residue that may collect in or damage the seat/orifice
• Place a strainer upstream of the valve with a porosity < 400 microns
• Mount the valve preferably on a horizontal pipeline with the coil upright
• Apply wrench only on the hexagon of the valve ends - tightening by using valve body or actuator may damage the valve
• Minimum Ap of 3.0 psi must be maintained to allow the normally closed valve to open

Valve Certifications

• CSA 6.5-2000-C/I (ANSI Z21.21-2000)
• CSA C22.2 #30-M1986 (R1999)
• CGA 3.9-M94 (ANSI/UL Standard 1002)