Enlarge

DESCRIPTION

Since its introduction in 1956, Micro Valve has provided successful service through thousands of applications. This makes choosing the right miniature instrument and control valve a snap. Choose Micro Valve, the best valve to solve liquid, air, and gas service design problems. It absolutely will not leak. With other miniature valves, leakage occurs when flow is redirected from one port to another. But with the Micro Valve, flow is instantly redirected so there
is no leakage.

Quick, Sure Response with Design Adaptability

With a unique, over-center snap-action you get a quick, sure response. There are no sliding seals, packing, or tight-fitting moving parts to leak, wear out or stick. Therefore, no lubricants are required. All models have been tested through several million cycles without maintenance, thus guaranteeing your systemsʼ performance.

Micro Valves will withstand abrasive-bearing fluids.

With all ports having some connection, external contaminants cannot enter the units. Dirt and grit will not prevent tight seating and will not cause the valve to stick.

Dependable Performance

The valve offers sure response, with no “neutral” position, and no varying time lag between positions. Micro Valves maintains either position without holding force, and cannot be vibrated or jarred out of position.

Valve action is full-speed regardless of operator speed or force applied. Trip-point position repeats accurately and is essentially independent of the speed of the external actuating device.

Light operating forces are required and not affected by operating pressure or flow rate. Shut-off is bubbletight up to rated pressures.

FEATURES

Flow is instantly redirected, so there is no leakage

Unique over-center snap action provides quick, sure response

No sliding seals, packing or tight-fitting moving parts to leak or wear out

Requires no lubrication; no need to introduce a system lubricator

Suitable for vacuum service